Clean Room Equipment

GEMTECH Differential Pressure Gauge Range 0-100 KPA

GEMTECH Differential Pressure Gauge Range 0-500 MM

Series G2000 GEMTECH Differential Pressure Gauges

Series G2000, GEMTECH Differential Pressure Gauges are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature -  -21 140 6 60


• Rated Pressure -20 inHg~30 inHg (-68~103KPa)


• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).


• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back


• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test


• Accuracy - ±2% of full span at 70 21 3% on -0, and ±4% on -00)


• Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM


• There Is No Need To Fill Liquid To Gauge.


• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.


• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.


• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.


• Exact And Stable Fixed Position Of Needle.


• The Gauge Has Great Antiknock Characteristics.


• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECH Magnehelic Gauge Range 30-0-30 Pascals

Series G2000 GEMTECH Magnehelic Gauge

Series 2000, GEMTECH Magnehelic Gauge are Widely Utilized For Measuring Pressure of Fan And Blowing Machine, resistance of filter, wind speed, furnace pressure, differential pressure of pore plate, the pressure of drum water level, Liquid Amplifier And Hydraulic Pressure System. Meantime, They Are Used To Control The Automatic Valve And Specific Value Of Air-Producer Gas In Combustion And They Are Used To Test Blood Pressure And Respiratory Pressure In Medical Health Care Equipment. There Are More Than 81 Models To Suit Your Needs Precisely. The Key Components Adopt Import Materi

SPECIFICATION

• Ambient Temperature -  -21???~140??????-6???~60??????
• Rated Pressure -20 inHg~30 inHg (-68~103KPa)
• Overpressure - Protective rubber stopper will be blown out if rated pressure is up to about 50.8 inHg (172KPa).
• Process Connections - 1/8" female NPT duplicate high and low pressure taps - one pair side and one pair back
• Housing - Die cast aluminum case and bezel, with acrylic cover, Exterior finish is coated gray to withstand 168 Hour Salt Spray Corrosion Test
• Accuracy - ±2% of full span at 70???(21??????(±3% on -0, and ±4% on -00)
• Range -20 inHg~38 inHg (-68KPa~130KPa)(Special Specification also can be ordered.)

FEATURES

• OEM/ODM
• There Is No Need To Fill Liquid To Gauge.
• The Gauge Can Measure Positive Pressure, Negative Pressure And Differential Pressure.
• It Will Be Easy To Install And Measure In Different Ways Because Of Two Groups Of Ports Which Can Measure Positive And Negative Pressure.
• To Eliminate The Friction From The Movement Of Gear Wheel By The Mechanism Of Magnetic Magnet Feed.
• Exact And Stable Fixed Position Of Needle.
• The Gauge Has Great Antiknock Characteristics.
• There Are 81 Types Of Ranges. Minimum is 0-60 Pa And Maximum is 0-21-KPa.

GEMTECH Minihelic Differential Pressure Gauge Range 0-50 MM

GEMTECH Mini Differential Pressure Gauges Are Typical Of The Concise Structure, Small Size, Lower Energy Consumption And High Accuracy. This Product Is Fully Applicable To Any Occasion. The Shell Is Made From Mineral And Glass-Flled Nylon. And The Lens Is Made From Polycarbonate. The Gauges Can Work Under Heavy Pressure, Blast, And The Maximum Pressure Can Be Up To 30 Pound/ Square Inch. 2.067 mb. When Pressure Is Too Great, The Rupture Disk Which Is Connected To Diaphragm Can Protect The Product.

SPECIFICATION

• Size - 2-29/32 Inch (73.82 MM) × 2-7/16 Inch (61.93 MM)


• Weight - 6 oz (170.1g)


• Rated Total Pressure- Rated Total Pressure: 50 Pound/ Square Inch(3.445 Milli Bar)


• Accuracy - ±5% of FS at 70°F (21.1°C)


• Connections - Barbed, for 3/16" ID Tubing (Standard); 1/8" Male NPT (Optional)


• Housing - Glass Filled Nylon; Acrylic Lens.


• Temperature Limits - 20 to 120°F (-6.67 to 48.9°C).


• Paint - Black


• Standard Fitting - 2 Pcs 4-40×1-5/8 Inch Construction Bolts 2 Pcs 4-40 Hexagonal Nuts 1 Pcs 0???050 Inch Hexagonal Spanner 1 Pcs Bracket Of Panel Mounting.


• Specifications - 125 Pa, 250 Pa, 500 Pa, 750 Pa, 1 KPa, 2 KPa.

Magnehelic Differential Pressure Gauge

We provide a comprehensive range of Magnehelic Differential Pressure Gauge which is diaphragm operated. The Magnehelic Differential Pressure Gauge is used in applications for measuring positive, negative, or differential pressure with an accuracy of 2%. Besides, Magnehelic Differential Pressure Gauge is also applied for monitoring filter status, duct static pressure, room pressure, fan or blower pressure, paint booths, dust collectors, cabinet purging and many others. The Magnehelic Differential Pressure Gauge runs on air and non-combustible compatible gases and comes with the option of natural gas. In addition to this, Magnehelic Differential Pressure Gauge is fabricated by using die cast aluminum case and bezel, with acrylic cover. Magnehelic Differential Pressure Gauge offered by us has exterior finish with grey color to withstand 168 hour salt spray corrosion test.

Specifications

• Accuracy : ±2% of full scale (±3% on - 0, -100 Pa, -125 Pa, 10MM and ±4% on - 00, -60 Pa, -6MM ranges), throughout range at 70^oF (21.1^oC)
• Pressure Limits : -20 Hg. to 15 psig.â�  (-0.677 bar to 1.034 bar)
• HP Option : 35 psig (2.41 bar), 80 psig (5.52 bar)
• Overpressure : Relief plug opens at approximately 25 psig (1.72 bar), standard gauges only
• Temperature Limits : 20 to 140^oF.* (-6.67 to 60^oC)
• Size : 4 (101.6 mm) Diameter dial face
• Mounting Orientation : Diaphragm in vertical position
• Process Connections : 1/8 female NPT duplicate high and low pressure taps one pair side and one pair back
• Weight : 1 lb 2 oz (510 g), MP & HP 2 lb 2 oz (963 g)
• Other position orientations

Applications

• Filter Status
• Duct Static Pressure
• Clean Room Pressure
• Building Pressure
• Fan and Blower Pressure
• Paint Booths
• Dust Collectors
• Glove Box Pressure
• Bubbler Systems
• Cabinet Purging

Note : Below given images in Products Snap Shots are the applications where Magnehelic Differential Pressure Gauge is used

Stainless Steel Pass Box

Stainless Steel Pass Box offered by us is required for material transfer to & from clean rooms. Stainless Steel Pass Box reduces number of persons entering clean room. Stainless Steel Pass Box offered by us is available with interlocking arrangement, and with or without built in HEPA air barrier. We offer Stainless Steel Pass Box (dynamic and static) at market leading prices.

Standard Size : 610 MM X 610 MM X 610 MM, 915 MM X 915 MM X 915 MM

Interlocking Facilities : Completely Automatically with DC Solenoid Valves

Accessories : Fluorescent & UV light of Philips Make

Motor & Blower : Motor AUE / STD make & Blower-Enviro Tech / STD

Sensocon Differential Pressure Gauge

We are one step ahead of our competitors in manufacturing and supplying a wide range of Low Cost Sensocon Differential Pressure Gauge. These premium quality products are manufactured using high-grade raw material, which is obtained from the most authentic and leading vendor in the market. Skilled professionals are hired to provide proper guidelines to our staff to manufacture high quality range of these products. The product is used for various purposes in different industries like filter Status, Duct Static, Pressure Clean Room Pressure, Building Pressure,Fan and Blower Pressure.

Specifications

• Accuracy 2%
• Mounts in Industry
• Type : Arrow indicator
• Die Cast Aluminum Housing
• Standard Holes
• Temperature : 20 to 140 F